Slice Engineering Boron Nitride Paste – High Thermal Conductivity Compound

Slice Engineering Boron Nitride Paste – High Thermal Conductivity Compound for Hotends, Sensors & Heaters

5 cc
$11.99
Skip to product information
Slice Engineering Boron Nitride Paste – High Thermal Conductivity Compound

Slice Engineering Boron Nitride Paste – High Thermal Conductivity Compound for Hotends, Sensors & Heaters

$11.99
SKU 33952 MPN P-BNP-AC-0003

Material & surface use

Thermal compound for hotends, sensors & heater blocks.

Size
  • Free Shipping Over $50 · flat rates from $4.99 on $25+
  • Easy Returns 30 days from delivery
  • Ready to Ship Most in-stock orders ship the same business day

Boost your printer’s thermal performance with Slice Engineering’s Boron Nitride Paste, designed to improve heat transfer and temperature consistency across your hotend components.

This high-performance compound fills microscopic air gaps between heaters, thermistors, and hot blocks—maximizing heat flow while keeping your setup electrically safe. Ideal for installing and maintaining 3D printer hotends, thermowells, RTD sensors, and thermocouples. Non-conductive, RoHS and REACH compliant, and easy to clean with water, it’s the industry’s trusted solution for accurate, stable temperature control.

Slice Engineering Boron Nitride Paste – High Thermal Conductivity Compound

Features & Benefits

  • Improved Heat Transfer: Maximizes conductive efficiency between hot blocks, heaters, and sensors for faster heat-up times.
  • Accurate Temperature Readings: Minimizes air gaps and ensures even heat dispersion for more stable, reliable temperature control.
  • Non-Electrically Conductive: Safe for all 3D printer electronics — eliminates short-circuit risk after curing at 100 °C.
  • High Thermal Conductivity: Delivers 31.4 W/mK at 100 °C for exceptionally consistent performance.
  • Easy Cleanup: Water-soluble formula allows for simple maintenance and reapplication without harsh chemicals.
  • Safe & Compliant: Fully RoHS and REACH certified to meet global safety and environmental standards.
  • Secure Potting Solution: Keeps heaters and sensors firmly in place for maximum accuracy and safety.

Technical Specifications

Temperature Rating 850°C
Solubility in Water Soluble
Thermal Conductivity (100°C) 31.4 W/mK
Electrical Conductivity Non-conductive when dehydrated at 100°C
Form Paste
Color White
pH Level 9-10
Volume Options 1 cc / 5 cc / 30 cc
Manufacturing Made in the USA

Compatibility

This paste is perfect for ensuring optimal thermal performance with a wide range of components:

  • Slice Engineering Copperhead®, Mosquito®, and other all-metal hotends.
  • Most FDM 3D printers and heating blocks.
  • All temperature sensing equipment, including thermowells, thermocouples, and RTD sensors.

What's Included

  • 1 × Boron Nitride Paste
  • 1 × Precision Applicator

Pro Tip

Apply a thin, even layer to the heating elements or sensor bores before installation. A little goes a long way—applying excess paste can actually reduce efficiency.

About this product

Is this a lubricant, or does it do something else in my hotend?
It's a thermal compound, not a lubricant — boron nitride has been used for decades in industry as a heat-transfer and release coating for cartridge heaters, and here it fills the microscopic air gaps between your heater cartridge, thermistor, and the hot block. Slice rates it at 31.4 W/mK thermal conductivity at 100°C, which means faster heat-up and steadier temperature readings, not any lubricating function.
Is this thermal paste electrically conductive around my thermistor wires?
Not once it's properly cured, but there's a step people miss: the paste is water-based, so the carrier must fully evaporate before it becomes an electrical insulator — Slice's own knowledge base notes that paste still wet around a sensor's lead wires will skew its temperature reading. Dry it overnight or bake it at 90°C for about ten minutes, after which it's non-conductive, RoHS/REACH compliant, and readings return to normal.
How much paste should I actually apply, and where?
A thin, even layer on the outside of the heater cartridge and inside the hot block's heater bore is all you need — apply the same way to the temperature sensor bore, then insert and wipe away any excess that squeezes out. Slice's own knowledge base and pro tip both warn that excess paste can reduce efficiency rather than improve it, so the included precision applicator is sized for sparing use, not for filling the cavity.
What size do I actually need for a home setup?
The 1cc size covers several hotend services for a hobbyist doing occasional heater or thermistor swaps, since Slice's own guidance is to apply only a thin layer each time — a little goes a long way, and excess paste actually reduces efficiency. The 5cc and 30cc sizes make more sense if you're maintaining multiple printers, running a print farm, or doing this professionally as a repair or build service.
Can I clean it off if I apply too much or need to redo the install?
Yes — it's water-soluble, so you can wipe or rinse off excess before it cures rather than being stuck with a mess, which matters if you applied too thick a layer since Slice warns that excess paste actually reduces thermal efficiency. Once it dehydrates and cures at 100°C during your first heat cycle it becomes more durable and harder to remove, so correct the amount at the application stage with a damp cloth rather than after the first heat-up.
Does this only work with Slice's own hotends?
No — it's compatible with Slice's Copperhead and Mosquito hotends, but it also works with most FDM hotends and heating blocks generally, plus temperature sensing gear like thermowells, thermocouples, and RTD sensors. Anywhere a heater or sensor needs firm thermal contact with metal, this applies.

Good to know

Ordering & Shipping

We currently ship within the United States. Most in-stock orders placed before 12:00 PM CT ship the same business day.

Shipping is free on orders over $50; below that, flat rates start at $4.99 on orders over $25. You'll get a tracking number by email as soon as your parcel is on its way.

Payments & Billing

We accept all major credit cards, Shop Pay, and the accelerated checkout options shown at the top of the cart. Your card is charged when the order is placed.

Need to change or cancel an order? Email us right away and we'll do our best to help before it ships.

Returns & Refunds

Unused, unopened parts can be returned within 30 days in their original packaging. A flat $4.99 return shipping fee applies — email us first and we'll send return instructions.

Received the wrong item or something arrived defective? Contact us right away and we'll make it right with a replacement or full refund, no return fee in that case. Full details on our return policy page.

Product & Compatibility

Every part page lists the exact printer models it fits. If you're not sure which printer you have, start from Shop by printer and browse from there.

Ordered the wrong part? Email us. We'll help you find the right fit or sort a return.

Support

A real person answers our support email — not a bot. If a part arrives faulty or doesn't fit as described, tell us what happened and we'll make it right.

You may also like