Bambu Lab Liquid Glue

Bambu Lab Liquid Glue for Build Plate

$16.99
Skip to product information
Bambu Lab Liquid Glue

Bambu Lab Liquid Glue for Build Plate

$16.99

1 reviews

SKU 33964 MPN LGL001

Material & surface use

For PLA, PETG, PET, ABS, ASA and TPU — even coat, washes off with water. Not needed on SuperTack plates.

  • Free Shipping Over $50 · flat rates from $4.99 on $25+
  • Easy Returns 30 days from delivery
  • Ready to Ship Most in-stock orders ship the same business day

Ensure perfect first-layer adhesion with Bambu Lab Liquid Glue, a premium adhesive designed specifically for 3D printing. Ideal for materials like PLA, ABS, PETG, PET, ASA, and TPU, it provides reliable hold on Bambu Lab build plates that call for glue, preventing print failures, warping, and edge lift during long prints.

Unlike traditional glue sticks, this liquid formula spreads evenly and cleanly, ensuring a consistent coating across the build surface while leaving minimal residue. Once your print is complete, the glue can be easily washed away with water—no scraping or solvent needed.

Formulated with environmentally friendly ingredients and low odor, Bambu Lab Liquid Glue offers a safer, cleaner, and more effective adhesion solution for every print.

Features

  • Excellent Adhesion: Maintains strong first-layer bonding to prevent print failures and detachment.
  • Easy Cleanup: Washes off easily from both the model and build plate with water.
  • Uniform Application: Smooth, even coating for consistent adhesion and cleaner results.
  • Safe and Eco-Friendly: Non-toxic, low-odor formula with minimal environmental impact.

Instructions

Apply gentle pressure to the applicator head to open the valve, then spread the glue evenly across the print area. Clean with water after printing.
Tip: For challenging materials, slightly increase bed temperature to enhance adhesion.

Caution: Avoid excessive squeezing and reapplication between prints for best results.

Bambu Lab Liquid Glue Recommended Settings

Liquid Glue vs. Glue Stick

  • Liquid Glue — the most even coat: PLA, PETG, PET, ABS, ASA and TPU, for the most consistent first layers. Bambu doesn't list it for PC or PA.
  • Glue Stick — the all-rounder: PLA, ABS, PETG, PC, PA and TPU. Choose it for polycarbonate and nylon (PA). On the Engineering Plate it also makes part removal easier.

Which Plates Need Glue?

  • Engineering Plate: always.
  • Smooth PEI Plate: for every filament except PLA.
  • Textured PEI Plate: usually not — a thin layer helps PETG release.
  • Cool Plate SuperTack: never — it is designed to print without glue.

What makers are saying

5.01 review

  • 5 stars: 1 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
P
PHILIP Lang

Good stuff

About this product

When should I reach for this instead of the glue stick?
For large or high-adhesion prints, warp-prone materials like PA or PC, and long print times where a print sits on the plate for many hours. It's the stronger, more consistent option of the two — the glue stick is better suited to quick, routine PLA/PETG/ABS jobs where easy cleanup matters more than maximum hold.
How do I actually apply it — is it the same technique as a glue stick?
No, different mechanism: apply gentle pressure to the applicator head to open the valve, then spread it evenly across the print area yourself, rather than rubbing a solid stick directly on the plate. Avoid excessive squeezing and reapplying between every single print — overdoing it can work against you rather than improving adhesion.
Does this work on every Bambu Lab plate, including the SuperTack ones?
Yes — it provides reliable hold across all Bambu Lab build plates, and it's the recommended option for materials like PA and PC on plates like the Engineering Plate, where glue is mandatory regardless of material. That said, SuperTack plates are marketed as glue-free for their supported PLA/PETG range, so you'd typically only add glue there for an unusual warp-prone job.
Will this leave permanent residue or stain my plate over time?
It shouldn't — it's formulated to spread evenly with minimal residue and washes away cleanly with water, no scraping or solvents needed. As long as you're rinsing the plate between prints rather than letting layers of dried glue build up, it's designed not to leave the kind of buildup that degrades adhesion or finish over repeated use.
I applied it and my print is still lifting on a warp-prone material — what should I adjust next?
Try slightly increasing bed temperature for challenging materials once you've confirmed even glue coverage — glue alone can't fully compensate for a bed that's too cool for something like PA or PC. Also make sure you're not overdoing reapplication between prints; too much glue can hurt results rather than help on stubborn materials.

Good to know

Ordering & Shipping

We currently ship within the United States. Most in-stock orders placed before 12:00 PM CT ship the same business day.

Shipping is free on orders over $50; below that, flat rates start at $4.99 on orders over $25. You'll get a tracking number by email as soon as your parcel is on its way.

Payments & Billing

We accept all major credit cards, Shop Pay, and the accelerated checkout options shown at the top of the cart. Your card is charged when the order is placed.

Need to change or cancel an order? Email us right away and we'll do our best to help before it ships.

Returns & Refunds

Unused, unopened parts can be returned within 30 days in their original packaging. A flat $4.99 return shipping fee applies — email us first and we'll send return instructions.

Received the wrong item or something arrived defective? Contact us right away and we'll make it right with a replacement or full refund, no return fee in that case. Full details on our return policy page.

Product & Compatibility

Every part page lists the exact printer models it fits. If you're not sure which printer you have, start from Shop by printer and browse from there.

Ordered the wrong part? Email us. We'll help you find the right fit or sort a return.

Support

A real person answers our support email — not a bot. If a part arrives faulty or doesn't fit as described, tell us what happened and we'll make it right.

You may also like