BIQU Panda CryoGrip Pro Glacier build plate for Bambu Lab A1 Mini

BIQU Panda CryoGrip Pro 7-Layer Build Plate for Bambu Lab A1 Mini (Glacier / Frostbite)

Glacier
$14.99
Skip to product information
BIQU Panda CryoGrip Pro Glacier build plate for Bambu Lab A1 Mini

BIQU Panda CryoGrip Pro 7-Layer Build Plate for Bambu Lab A1 Mini (Glacier / Frostbite)

$14.99
SKU 33267 MPN 1060000747

Confirmed fit

  • A1 Mini

Shopping for a different printer? Browse parts by model →

Finish
  • Free Shipping Over $50 · flat rates from $4.99 on $25+
  • Easy Returns 30 days from delivery
  • Ready to Ship Most in-stock orders ship the same business day

Stop compromising on your first layer. The BIQU Panda CryoGrip Pro is the definitive 7-layer "sandwich" build plate engineered for the Bambu Lab ecosystem. It provides the stability required for high-velocity printing.

The secret is the Cryo-Coating—a specialized polymer that provides industrial-grade adhesion at much lower temperatures. By printing PLA "cold," you virtually eliminate "elephant's foot" and thermal warping.

Choose Your Texture

  • Glacier (Fine / Satin): Leaves a smooth, professional satin-like finish. Ideal for mechanical parts and prototypes that require a clean look.
  • Frostbite (Coarse / Textured): The "Grip King." An aggressive matte texture that hides layer lines and provides the strongest bond for large, flat models.

Plate Size

This is the compact 180 × 180 mm plate. Plate sizes are not interchangeable: the larger Bambu Lab machines each have their own CryoGrip Pro listing, sized to their bed.

The 7-Layer Advantage: Built for Speed

Standard plates can struggle with the resonance of high-speed printing. The CryoGrip Pro's 7-layer reinforced construction provides:

  • Vibration Damping: Extra internal layers stabilize the plate against the high-frequency movements of modern high-speed toolheads.
  • Ultra-Flatness: Resists warping during long thermal cycles, ensuring a level bed across the entire surface.
  • Double-Sided Life: Both sides are fully coated, doubling the longevity of your investment.

Real-World Maker Tips

  • Slicer Settings: Select "Textured PEI Plate" or "Smooth PEI Plate" in your slicer settings.
  • Lower the Heat: For PLA, try bed temps between 35°C–45°C for maximum adhesion and minimal warping.
  • Maintenance: Avoid touching the surface; wipe with 90%+ IPA between prints to maintain the cryo-grip.

Technical Specifications

Feature Specification
Construction 7-Layer Reinforced Sandwich
Core Material Ferromagnetic Spring Steel
Usable Print Size 180 × 180 mm

About this product

What does 'cold-bed printing' actually mean with this plate?
The CryoGrip Pro's Cryo-Coating provides industrial-grade adhesion at much lower bed temperatures than standard PEI, so you can print PLA around 35-45°C instead of 55-60°C. Printing 'cold' like this virtually eliminates elephant's foot and thermal warping, since the first layer isn't fighting as much heat-driven expansion.
Glacier or Frostbite — which texture should I pick?
Glacier is the fine/satin finish, ideal for mechanical parts and prototypes where you want a clean, professional look on the bottom surface. Frostbite is the coarse/textured 'Grip King' option — an aggressive matte texture that hides layer lines and gives the strongest bond, best for large, flat models prone to warping.
Which size fits my specific Bambu printer?
180×180mm fits the A1 Mini; 256×256mm fits the A1, P1P, P1S, P2S, X1C, X1E, and X2D; 330×320mm fits the H2C and the A2L (which uses the same plate as the H2C); 350×325mm fits the H2D, H2D Pro, and H2S. Sizes are not interchangeable between these machines — match the plate to your bed exactly. Ordering by series alone isn't quite enough, since printers across the A, P and X Series share the same 256×256mm bed.
What does the '7-layer' construction actually improve?
The reinforced 7-layer sandwich construction adds vibration damping against the resonance of high-speed toolheads, keeps the plate ultra-flat across repeated thermal cycles, and coats both sides fully so you get double the usable service life compared to a single-sided plate. In practice, that combination is what lets the plate hold a flat, consistent first layer print after print on high-speed machines where a thinner single-layer plate might start to show waviness over time.
How do real users report this plate performing after repeated use?
A published third-party review reported 40+ prints with no adhesion failures on this plate line, noting the grip was strong enough that prints occasionally needed extra flexing to release rather than falling off prematurely — consistent with the aggressive-adhesion design intent of the Cryo-Coating.
How do I keep the Cryo-Coating grip working at its best?
Select 'Textured PEI Plate' or 'Smooth PEI Plate' in your slicer to match the surface, keep PLA bed temps in the 35-45°C range, and avoid touching the surface with bare hands — wipe with 90%+ IPA between prints. Skin oils and contamination are the most common cause of gradually declining adhesion on any PEI-family surface.

Good to know

Ordering & Shipping

We currently ship within the United States. Most in-stock orders placed before 12:00 PM CT ship the same business day.

Shipping is free on orders over $50; below that, flat rates start at $4.99 on orders over $25. You'll get a tracking number by email as soon as your parcel is on its way.

Payments & Billing

We accept all major credit cards, Shop Pay, and the accelerated checkout options shown at the top of the cart. Your card is charged when the order is placed.

Need to change or cancel an order? Email us right away and we'll do our best to help before it ships.

Returns & Refunds

Unused, unopened parts can be returned within 30 days in their original packaging. A flat $4.99 return shipping fee applies — email us first and we'll send return instructions.

Received the wrong item or something arrived defective? Contact us right away and we'll make it right with a replacement or full refund, no return fee in that case. Full details on our return policy page.

Product & Compatibility

Every part page lists the exact printer models it fits. If you're not sure which printer you have, start from Shop by printer and browse from there.

Ordered the wrong part? Email us. We'll help you find the right fit or sort a return.

Support

A real person answers our support email — not a bot. If a part arrives faulty or doesn't fit as described, tell us what happened and we'll make it right.

You may also like