BIQU Panda Claw extruder gear set for Bambu Lab P1 and X1 Series

BIQU Panda Claw Extruder Gear Set for Bambu Lab P1 / X1 Series

Sale price  $23.99 Regular price $25.99
Skip to product information
BIQU Panda Claw extruder gear set for Bambu Lab P1 and X1 Series

BIQU Panda Claw Extruder Gear Set for Bambu Lab P1 / X1 Series

Sale price  $23.99 Regular price $25.99
SKU 33283 MPN 1060000712

Confirmed fit

  • P1P
  • P1S
  • X1C

Shopping for a different printer? Browse parts by model →

  • Free Shipping Over $50 · flat rates from $4.99 on $25+
  • Easy Returns 30 days from delivery
  • Ready to Ship Most in-stock orders ship the same business day

The BIQU Panda Claw replaces the stock extruder gear with a golden nano-coated hardened-steel gear, a self-lubricating brass spur gear and a CNC-machined aluminum idler arm. It is built for abrasive fiber filaments, with a tooth profile tuned for even filament flow.

This is the P1 / X1 Series version. The A1 Series Panda Claw is a different part with a different arm, so the two are not interchangeable. Each has its own listing.

Features

  • Golden Nano-Coated Hardened Steel Gear: Exceptional hardness and wear resistance, ideal for abrasive fiber filaments.
  • Optimized Tooth Profile: Ensures even filament flow, reducing print imperfections.
  • Self-Lubricating Brass Spur Gear: Enhances durability and minimizes friction.
  • Lightweight 5-Spoke Design: Reduces moving mass for improved accuracy.
  • CNC Machined AL 6061 T6 Aluminum Idler Arm: High strength and tight tolerances eliminate unwanted movement.

Technical Specifications

Material Golden RNC Nano-Coated Hardened Steel Gear, Brass Spur Gear, AL 6061 T6 Aluminum CNC Idler Arm
Lubrication MoS2 Grease for long-lasting performance
Precision Machining Ultra-tight tolerances for enhanced reliability

In the Box

  • 1x Panda Claw gear set
  • 2x Bearings
  • 1x MoS2 grease

About this product

Which variant do I need for my printer?
SKU 33282 (BIQU Panda Claw A1/A1 Mini Hardened Gear Set) fits the A1 and A1 Mini. SKU 33283 (BIQU Panda Claw P1/X1 Hardened Gear Set) fits the P1P, P1S, and X1C. The two use different mounting geometry for their respective extruder assemblies, so check your printer model before ordering — they are not interchangeable between families.
Why upgrade the extruder gear at all?
The gold nano-coated hardened steel drive gear resists wear from abrasive fiber-filled filaments far better than Bambu's stock gear, and the optimized tooth profile improves filament grip consistency, which reduces print imperfections from slipping or under-extrusion during long or fast prints. Over a printer's service life, that wear resistance is the real payoff versus a stock gear that gradually loses grip.
What are the idler arm and spur gear made from?
The idler arm is CNC-machined from AL 6061 T6 aluminum for tight tolerances that eliminate unwanted movement, and the spur gear is self-lubricating brass, which reduces friction and adds durability compared to a plain steel or plastic spur gear. Together these material choices are what let the gear set outlast Bambu's stock plastic-and-steel combo under repeated heavy use.
Does this reduce toolhead weight for faster printing?
Yes — the gear set uses a lightweight 5-spoke design specifically to reduce moving mass in the extruder assembly, which improves accuracy at high speed by lowering inertia during rapid direction changes. It's a targeted weight-reduction upgrade rather than a full toolhead redesign. On a printer already capable of very high accelerations, shaving grams off the moving extruder assembly is one of the more effective ways to reduce ringing without touching firmware or motion settings.
What lubrication does the gear set need after install?
It ships pre-lubricated with MoS2 grease for long-lasting performance, so no additional lubrication is needed at install. If you notice increased friction or noise after months of heavy use, a light reapplication of MoS2 grease to the gear teeth is the standard maintenance step. Avoid over-applying grease, since excess lubricant can attract filament dust and grit inside the extruder housing, which defeats the purpose of a clean, low-friction gear mesh.

Good to know

Ordering & Shipping

We currently ship within the United States. Most in-stock orders placed before 12:00 PM CT ship the same business day.

Shipping is free on orders over $50; below that, flat rates start at $4.99 on orders over $25. You'll get a tracking number by email as soon as your parcel is on its way.

Payments & Billing

We accept all major credit cards, Shop Pay, and the accelerated checkout options shown at the top of the cart. Your card is charged when the order is placed.

Need to change or cancel an order? Email us right away and we'll do our best to help before it ships.

Returns & Refunds

Unused, unopened parts can be returned within 30 days in their original packaging. A flat $4.99 return shipping fee applies — email us first and we'll send return instructions.

Received the wrong item or something arrived defective? Contact us right away and we'll make it right with a replacement or full refund, no return fee in that case. Full details on our return policy page.

Product & Compatibility

Every part page lists the exact printer models it fits. If you're not sure which printer you have, start from Shop by printer and browse from there.

Ordered the wrong part? Email us. We'll help you find the right fit or sort a return.

Support

A real person answers our support email — not a bot. If a part arrives faulty or doesn't fit as described, tell us what happened and we'll make it right.

You may also like