GammaMaster Nozzle-RepRap-0.4mm

Slice Engineering GammaMaster® Nozzle 0.4 mm (RepRap V6 / M6) – for TZ-3.0 & Aftermarket Hotends

RepRap / 0.4 mm
$24.99
Skip to product information
GammaMaster Nozzle-RepRap-0.4mm

Slice Engineering GammaMaster® Nozzle 0.4 mm (RepRap V6 / M6) – for TZ-3.0 & Aftermarket Hotends

$24.99
SKU 33995

Confirmed fit

  • TZ-3.0 Hotend
GeometryRepRap / 0.4 mm

Sold out. Get an email when it's back.

We'll send one email when this exact option is restocked. No spam.

  • Free Shipping Over $50 · flat rates from $4.99 on $25+
  • Easy Returns 30 days from delivery
  • Ready to Ship Most in-stock orders ship the same business day

Upgrade your extrusion system with the GammaMaster® Nozzle, the next evolution in nozzle technology forged from the latest advancements in metallurgy and surface preparation. For too long, makers have had to settle for a difficult compromise: choose hardened steel for durability but suffer from poor thermal conductivity, or choose brass for speed but sacrifice longevity. GammaMaster® ends the trade-off.

This is the first nozzle designed specifically for abrasive filament printing that retains the thermal performance of copper alloys. By combining superior heat transfer with extreme wear resistance, the GammaMaster® offers the best of both worlds — delivering high-flow performance and consistent temperatures even when printing Carbon Fiber, Glass Fiber, and other abrasive materials.

Before You Buy — check your geometry

This is the RepRap (V6) / M6 version. It screws into an aftermarket all-metal hotend with a standard M6 thread — such as the TZ-3.0.

It will not fit a stock Bambu Lab hotend (those are sealed quick-swap units sold only as complete hotends), and it is not the FIN-geometry nozzle used by the Slice Engineering Mako®.

Features

  • No Compromise Performance: Solves the traditional trade-off between wear resistance and thermal conductivity. Enjoy the durability of a hardened nozzle with the high-speed heat transfer of brass.
  • Advanced Metallurgy: Engineered using proprietary alloys and cutting-edge surface preparation technology to withstand the harshest printing environments without degrading.
  • Abrasive Ready: Built to handle Carbon Fiber, Glass Fiber, Glow-in-the-Dark, and Metal-filled filaments without widening the bore or losing precision over time.
  • Superior Thermal Conductivity: Maintains stable melt zone temperatures for consistent extrusion, reducing the risk of cold slugs and allowing for faster print speeds compared to standard hardened steel.
  • RepRap (V6) Geometry: Industry-standard V6 style with an M6 thread, for broad compatibility across aftermarket hotends.

Slice Engineering GammaMaster nozzle

GammaMaster wear resistanceGammaMaster thermal performance

GammaMaster detail

Specifications

Feature Specification
Material Technology GammaMaster® Advanced Metallurgy
Geometry RepRap (V6) Style
Thread Type M6 Standard
Nozzle Diameter 0.4 mm
Thermal Conductivity High (comparable to brass/copper)
Wear Resistance Extreme (abrasive rated)
Filament Diameter 1.75 mm

Material Compatibility Guide

  • Abrasive Filaments: Carbon Fiber (CF), Glass Fiber (GF), Glow-in-the-Dark, Wood/Stone/Metal Fills.
  • Standard Filaments: PLA, ABS, PETG, TPU, ASA, PC.

What's in the Box

  • 1 × GammaMaster® High-Performance Nozzle (RepRap / V6)

About this product

Does this GammaMaster nozzle fit my Slice Mako hotend?
No — despite sharing the GammaMaster name with the tip in a Mako, this is a different geometry: RepRap (V6) / M6 thread, built for aftermarket all-metal hotends like the TZ-3.0. Slice's own FIN standard documentation explains why they aren't interchangeable — FIN is a separate, newer geometry built to insulate the nozzle tip, which V6/M6 threads never supported. The Mako needs the FIN-geometry GammaMaster tip, which ships pre-installed and isn't sold on this listing.
What hotends does this actually fit?
Any aftermarket all-metal hotend using a standard M6 thread, such as the TZ-3.0 — that's the RepRap V6 style this nozzle is built around. It will not fit a stock Bambu Lab hotend, since those ship as sealed quick-swap units with no separately replaceable nozzle, and it will not fit the Slice Mako either, since that uses the different FIN geometry.
What's the actual benefit over a standard hardened steel or brass nozzle?
It solves the usual trade-off: hardened steel resists abrasive wear but conducts heat poorly, while brass conducts heat well but wears out fast on CF/GF filament. Slice introduced GammaMaster specifically to close that gap through proprietary alloy and surface-preparation work, aiming for brass-level thermal conductivity with hardened-steel wear resistance, so abrasive filament runs at higher flow without the usual speed penalty.
Can I run plain PLA or PETG through this, or is it only for abrasive filaments?
It handles both. It's rated abrasive-ready for carbon fiber, glass fiber, glow-in-the-dark, and metal-filled filaments, but the material compatibility guide also lists standard PLA, ABS, PETG, TPU, ASA, and PC as fully supported. You're not sacrificing anything on non-abrasive prints by using it — the whole point of GammaMaster's alloy is that it doesn't trade thermal performance for wear resistance either way.
How do I install it without damaging the threads?
Thread it in hand-tight first, then finish with a calibrated torque wrench rather than guessing — Slice's own Nozzle Torque Wrench is rated for this M6-thread nozzle at 1.5 Nm. Over-tightening by hand is one of the most common ways to strip aftermarket M6 hotend threads, so a torque tool is worth using here rather than relying on feel.

Good to know

Ordering & Shipping

We currently ship within the United States. Most in-stock orders placed before 12:00 PM CT ship the same business day.

Shipping is free on orders over $50; below that, flat rates start at $4.99 on orders over $25. You'll get a tracking number by email as soon as your parcel is on its way.

Payments & Billing

We accept all major credit cards, Shop Pay, and the accelerated checkout options shown at the top of the cart. Your card is charged when the order is placed.

Need to change or cancel an order? Email us right away and we'll do our best to help before it ships.

Returns & Refunds

Unused, unopened parts can be returned within 30 days in their original packaging. A flat $4.99 return shipping fee applies — email us first and we'll send return instructions.

Received the wrong item or something arrived defective? Contact us right away and we'll make it right with a replacement or full refund, no return fee in that case. Full details on our return policy page.

Product & Compatibility

Every part page lists the exact printer models it fits. If you're not sure which printer you have, start from Shop by printer and browse from there.

Ordered the wrong part? Email us. We'll help you find the right fit or sort a return.

Support

A real person answers our support email — not a bot. If a part arrives faulty or doesn't fit as described, tell us what happened and we'll make it right.

You may also like