{"product_id":"bambu-cool-plate-supertack-pro-for-h2d-improved-adhesion-build-surface","title":"Bambu Cool Plate SuperTack Pro for H2D \/ H2S – Improved Adhesion Build Surface","description":"\u003cp\u003eTake your first-layer reliability to a professional tier. The \u003cb\u003eBambu Cool Plate SuperTack Pro\u003c\/b\u003e is a premium spring steel build plate engineered to completely eliminate print warping and adhesion failures on PLA and PETG filaments.\u003c\/p\u003e\n\u003cp\u003eThis upgraded \u003cb\u003ePro Edition\u003c\/b\u003e introduces an advanced, scratch-resistant coating that offers absolute structural bonding during active printing while fine-tuning the cooldown release cycle. Whether you are pushing massive industrial parts on large-format machines like the \u003cb\u003eH2D\u003c\/b\u003e, working around a worn-out print bed surface, or trying to slash your energy overhead, the SuperTack Pro ensures seamless execution without the need for glue sticks or messy adhesion slurries.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" alt=\"Bambu Lab Build Plate Cool Plate SuperTack Pro for H2D \/ Hs2\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0714\/3578\/0334\/files\/Bambu_Lab_Build_Plate_Cool_Plate_SuperTack_Pro_for_H2D_Hs2.png?v=1781521150\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"Bambu Lab Build Plate Cool Plate SuperTack Pro for H2D \/ Hs2\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0714\/3578\/0334\/files\/Bambu_Lab_Build_Plate_Cool_Plate_SuperTack_Pro_for_H2D_Hs2_2.png?v=1781521150\"\u003e\u003c\/div\u003e\n\u003ch2\u003eWhat Makes it Pro?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e25% Longer Lifespan:\u003c\/b\u003e Engineered for continuous production environments, retaining premium sticky properties with less than 15% adhesion loss even after 300 complete print cycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e10% Lower Operating Temperature:\u003c\/b\u003e Advanced chemical binding properties allow secure adhesion at significantly reduced heatbed targets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSuperior Scratch Resistance:\u003c\/b\u003e Enhanced surface density stands up to repeated scraper usage and part removals far better than standard thin coatings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTemperature Optimization \u0026amp; Energy Savings\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003cth\u003eStandard SuperTack Temperature\u003c\/th\u003e\n\u003cth\u003e\u003cb\u003eSuperTack Pro Temperature\u003c\/b\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cb\u003eYour Energy Savings\u003c\/b\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePLA\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e45°C\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003e40°C\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e11% Less Heat Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePETG\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70°C\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003e60°C\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e14% Less Heat Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eSize \u0026amp; Variant\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eH2D \/ H2S Large Format (350 × 320 mm):\u003c\/b\u003e Tailored specifically for the expansive build volume of the H2D and H2S series toolhead systems.\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"margin-top: 16px; margin-bottom: 16px; float: none;\" alt=\"Bambu Lab Build Plate Cool Plate SuperTack Pro for H2D \/ Hs2\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0714\/3578\/0334\/files\/Bambu_Lab_Build_Plate_Cool_Plate_SuperTack_Pro_for_H2D_H2S_INSTALLATION.png?v=1781521150\"\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCore Highlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSay Goodbye to Warping:\u003c\/b\u003e Delivers extreme first-layer bonding that effortlessly counters the internal shrinkage stresses of large-scale PLA and PETG structures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMasks Surface Imperfections:\u003c\/b\u003e Imparts a gorgeous, natural matte texture to the bottom of your printed models, subtly blending away minor print lines or bed flaws for a pristine cosmetic finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSmart Cooldown Release:\u003c\/b\u003e Once the print finishes and the bed cools down, the surface tension relaxes naturally, allowing parts to lift away safely with minimal mechanical effort.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePrint Removal \u0026amp; Surface Care\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eHow to Remove Prints Safely:\u003c\/b\u003e\u003cbr\u003eUse the plastic scraper included with your printer to gently lift a corner of the model, then slowly pry it off. If a large engineering part is sticking too tightly to the cold plate, simply heat the platform up to \u003cb\u003e50°C\u003c\/b\u003e via your printer control interface—the warmth will soften the interface layer slightly to assist with a damage-free removal.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCleaning Routine:\u003c\/b\u003e Wipe the plate down using only water and a mild dish soap when grease or heavy workshop dirt builds up. \u003cb\u003eNEVER use organic solvents, especially Acetone,\u003c\/b\u003e as they will chemically degrade and permanently ruin the specialized SuperTack Pro coating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThe Nozzle Wipe Zone:\u003c\/b\u003e For X1, P1, and A1 series machines, the nozzle will repeatedly rub against the designated wiping patch before starting auto-leveling routine. Visible wear in this specific zone is completely normal and will not compromise print quality or nozzle life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eReal-World Maker Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eThe Silk Filament Rule:\u003c\/b\u003e While standard \u003cb\u003eBambu Lab PLA Silk+\u003c\/b\u003e is fully supported due to its specialized material formulation, generic third-party Silk PLAs adhere too aggressively and can pull up chunks of the coating. If printing non-Bambu Silk materials, you \u003cb\u003emust\u003c\/b\u003e select the \u003ci\u003eGeneric PLA Silk\u003c\/i\u003e preset inside Bambu Studio to adjust safety margins and verify your specific material compatibility before committing to a full print.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTPU Filament Ban:\u003c\/b\u003e Do \u003cb\u003eNOT\u003c\/b\u003e print flexible TPU filaments directly onto this plate. TPU forms an unbreakable chemical cross-bond with the soft SuperTack Pro coating, and removing the part will permanently tear the skin off your build surface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSubstrate Material:\u003c\/b\u003e High-Tensile Flexible Spring Steel Plate (0.4 mm thickness).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoating Profile:\u003c\/b\u003e Premium SuperTack Pro Viscous Matrix (0.05 mm thickness).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum Temperature Resistance:\u003c\/b\u003e Safe for configurations up to 120°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClassification:\u003c\/b\u003e High-Performance Consumable Component (Warranty covers out-of-box manufacturing defects; does not cover wear, cosmetic scratches, or dents incurred via manual scraping).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":48124809609454,"sku":"34101","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3578\/0334\/files\/FAP040FAP041_H2_COOL_PLATE_SUPERTACK_PRO.png?v=1781520688","url":"https:\/\/makerparts3d.com\/products\/bambu-cool-plate-supertack-pro-for-h2d-improved-adhesion-build-surface","provider":"MakerParts 3D","version":"1.0","type":"link"}